Knuckle pin 35-135 etc
£2.00
BS-376399
Linkage
Knuckle joint pin fitted between upper arm and drop arm on Massey Ferguson 35, 135 and 240 tractors
5/8" pin size
Lower link check chain bolt kit
£3.90
BS-897677
Linkage
Lower link check chain bolt kit to suit Massey ferguson 35 and 135 tractors
Stabilizer bracket 35-135 etc (left)
£12.50
s.160
Linkage
Left hand side stabilizer bracket fits under the half axle.
Stabilizer chain assembly
£28.50
BS-1661406
Linkage
Stabilizer chain assembly to suit Massey ferguson 200, 300, 500 and 600 series tractors.
maximum lenght: 660mm
minimun lenght: 540mm
Stabilizer bracket 35-135 etc (right)
£12.50
s.161
Linkage
Right hand side stabilizer bracket fits under the half axle.
Inner check chains (pair)
£11.40
BS-2041
Linkage
Inner check chains attached between pto brackets and lower link arms.
Drop in hitch pin (dromone)
£18.15
BS-3792086
Linkage
Dromone hitch drop in pin to hold drawbar in place.
2 used
Sale
Check chain clevis (original type)
£2.00
£1.90
BS-180333
Linkage
Special Offers
Original type inner check chain clevis.
Square edged clevis
5/16" pin
Check chain assembly 135 etc
£26.60
BS-1863220
Linkage
Outter check chain assembly
maximum length: 495
minimum length: 435
Euro quick attach bracket
£49.50
BS-51102
Linkage
Easy fit Euro type quick attach bracket.
Ready spaced to be welded to your implement.
suitable for quickie loader.
Lower link stabilizer pin 35-135 etc
£5.45
s.171
Linkage
Lower link arm stabilizer pin.
bolts through drop arm and lower lift arm and attaches to inner check chain and outer stabilizer chain
Hinge pin 35-4245 etc
£7.50
BS-180901
Linkage
Rear hinge pin to suit various models of Massey Ferguson tractors.
264mm long
19mm diameter
Sale
Stabilizer stud
£2.00
£1.90
BS-vpl7030
Linkage
Special Offers
Stabilizer stud 5/8NF thread with 3/4" stud
Sale
Check chain brackets 35-135 etc (right)
£5.10
£4.84
BS-897912
Linkage
Special Offers
Inner check chain brackets which fit beside pto shaft.
right side
Knuckle joint 35-135 etc
£9.50
BS-1884376
Linkage
Knuckle joint fitted between upper arm and drop arm on Massey Ferguson 35, 135 and 240 tractors
5/8" pin hole size
